Spartan iShine®1Gallon 4count

DIRECTIONS FOR USE
For optimal results, always use Spartan floor cleaners and strippers.

INITIAL APPLICATION

1. Strip away all old wax or floor finish using a Spartan stripper and warm or room temperature water (80°F – 120°F), depending on the level of buildup.
2. Remove the stripping solution and rinse the floor two to three times with clean water.
3. For older, worn, or damaged flooring, apply two coats of a Spartan sealer. However, iShine can also be used as a self-sealing finish if preferred.
4. Apply iShine in an even, uniform coat. Allow it to dry thoroughly for 30–40 minutes until the surface is dry to the touch.

MAINTENANCE
Routine: Dust mop using Spartan’s Dust Mop/Dust Cloth Treatment, then damp mop with a Spartan neutral cleaner.
Weekly: Dust the floor with Spartan’s Dust Mop/Dust Cloth Treatment and damp mop with a Spartan neutral cleaner. To repair high-traffic areas between applications, use Bounce Back®, Spraybuff®, or SunSwept®, following the instructions carefully. Re-coat traffic lanes as needed.
Periodic: Dust mop the floor, scrub, and reapply iShine as necessary.
Yearly: Deep scrub and recoat, or fully strip, reseal if required, and reapply iShine.