Spartan On an’ On® 5 Gallon Pail

Note: For optimal results, always use Spartan floor cleaners and strippers.

INITIAL APPLICATION

1. Strip away all old wax or floor finish. Use warm or room temperature water (80°F – 120°F) along with a Spartan stripper, depending on the level of buildup.
2. Remove the stripping solution and rinse thoroughly with clean water 2-3 times. Allow the floor to dry completely.
3. For older, worn, or damaged flooring, apply two coats of a Spartan sealer. However, On an' On can also be used as a self-sealing finish if preferred.
4. Apply On an' On in a thin, even coat. Let it dry for 30-40 minutes until the surface is dry to the touch. Apply additional coats in the same manner.

MAINTENANCE
Routine: Dust mop or sweep the floor as needed.
Periodic: Dust and damp mop using one of Spartan's neutral cleaners. To quickly repair high-traffic areas between finish applications, burnish, use a Spartan restorer, or spray buff. Re-coat traffic lanes as necessary. For heavily soiled areas, machine scrub using the appropriate dilution of one of the recommended cleaners.
As Needed: Dust mop the floor, scrub with one of Spartan's all-purpose cleaners, and reapply On an' On.
Annual: Deep scrub and recoat, or completely strip, reseal, and reapply the floor finish.