Instructions for Use
Preparation
- Block off areas to be stripped or finished, as floors will be extremely slippery until dry.
- Strip the floor using the recommended Diversey brand stripper, following the directions on the stripper label.
Coating
- Apply 3 or more even coats of the product using a clean finish mop or the Diversey ProSpeed™/MC or TrailBlazer™/MC Floor Finish Applicator Systems.
- Continue applying coats until the desired gloss level is achieved.
- Allow 30–45 minutes of drying time between coats. Drying time may vary depending on temperature, humidity, and ventilation.
- Let the finish cure for 24 hours before burnishing.
Maintenance
- Dust mop or sweep regularly.
- Clean the floor using a mop or automatic scrubber with the recommended Diversey brand cleaner, as instructed on the label.
- Burnish the floor using appropriate pads for optimal results.
Sustainability and Compliance
Signature® Ultra High Speed Floor Finish meets the latest VOC standards in North America, including the California Air Resources Board (CARB) 2011 regulations. This product is also formulated with biodegradable surfactants and solvents, and does not contain endocrine-disrupting plasticizers, dyes, or fragrances, making it an ideal choice for sustainable facility care programs.
Reviews
There are no reviews yet.