DIRECTIONS FOR USE
For optimal results, always use Spartan floor cleaners and strippers.
INITIAL APPLICATION
- Strip away all old wax or floor finish using a Spartan stripper and warm or room temperature water (80°F – 120°F), depending on the level of buildup.
- Remove the stripping solution and rinse the floor two to three times with clean water.
- For older, worn, or damaged flooring, apply two coats of a Spartan sealer. However, iShine can also be used as a self-sealing finish if preferred.
- Apply iShine in an even, uniform coat. Allow it to dry thoroughly for 30–40 minutes until the surface is dry to the touch.
MAINTENANCE
Routine: Dust mop using Spartan’s Dust Mop/Dust Cloth Treatment, then damp mop with a Spartan neutral cleaner.
Weekly: Dust the floor with Spartan’s Dust Mop/Dust Cloth Treatment and damp mop with a Spartan neutral cleaner. To repair high-traffic areas between applications, use Bounce Back®, Spraybuff®, or SunSwept®, following the instructions carefully. Re-coat traffic lanes as needed.
Periodic: Dust mop the floor, scrub, and reapply iShine as necessary.
Yearly: Deep scrub and recoat, or fully strip, reseal if required, and reapply iShine.
Reviews
There are no reviews yet.