Diversey High Noon® UHS Finish 5 Gallon BIB

Use Instructions:

Preparation:

• Block off areas to be stripped or finished. Floors will be very slippery until completely dry.
• Strip the floor using a Diversey brand stripper, following the instructions on the stripper label.

Coating:

• Apply 3 or more medium coats of High Noon® Urethane Fortified UHS Floor Finish using a clean mop or the Diversey ProSpeed™/MC Floor Finish Applicator System.
• Continue applying coats until the desired gloss is achieved. For porous resilient or stone floors, first apply 2 coats of a recommended Diversey sealer.
• Allow 30–45 minutes of drying time between coats. Drying time may vary depending on temperature, humidity, and ventilation. Let the finish cure for 24 hours before burnishing.

Maintenance:

• Dust mop or sweep the floor. Clean daily using a mop or automatic scrubber with a recommended Diversey brand cleaner, following label instructions.
• To enhance the floor’s appearance, burnish using the appropriate pads.
• Clean and restore gloss using a recommended Diversey Cleaner/Maintainer.
• Apply Cleaner/Maintainer with an autoscrubber or damp mop, allow the floor to dry, and then burnish.

Recoating:

• Dust mop or sweep the floor.
• Clean the floor with a mop or automatic scrubber using the recommended Diversey cleaner, as per label instructions.
• Block off the area and apply 1–2 uniform coats of finish using a clean finish mop.
• Let the finish cure for 24 hours before burnishing.