Spartan FloorFront® 5 Gallon Pail

Directions for Use:

Some individuals may be sensitive to ingredients in this product. Prior to use, read the product label and Safety Data Sheet (SDS). If you have any questions, consult your employer or a physician. Wet floors may be slippery—use signs or barricades to prevent pedestrian traffic.

Initial Application:

• Cold water is recommended.

1. Completely strip all old finish from the floor using Green Solutions Floor Finish Remover, depending on the build-up.
2. Remove all stripping solution, then rinse the floor with clean water two or three times.
3. Apply FloorFront in a uniform coat. Allow it to dry for 30 to 40 minutes until the surface is dry to the touch. Apply additional coats in the same manner, with a minimum of three to five coats recommended. FloorFront is designed as a self-sealing finish.

Note: For best results, always use Spartan floor cleaners and strippers.

Maintenance:

• Routine Maintenance: Dust mop or sweep the floor as needed. Spartan Water-Based Dust Mop/Dust Cloth Treatment is recommended. Damp mop using a neutral Spartan cleaner.
• Periodic Repair: Dust mop and damp mop as per routine procedures. Then, dry buff or burnish the floor using a non-aggressive polishing pad.
• Yearly or As Needed: For heavily soiled areas, machine scrub and re-coat, or completely strip and re-finish.

For more information, contact Spartan Chemical Company at 1-800-537-8990 or visit www.spartanchemical.com.

Important: Always read the product label and precautionary statements before use. Safety Data Sheets for all Spartan products are available from your authorized Spartan distributor or online at www.spartanchemical.com.