Spartan The Fixx 5 Gallon Pail

DIRECTIONS FOR USE:

Wet floors can be slippery. Use signs or barricades to prevent pedestrian traffic. Some individuals may have sensitivities to the ingredients in this product. Be sure to read the product label and Material Safety Data Sheet (MSDS) before use. If you have any questions, consult your employer or a physician. Material Safety Data Sheets for all Spartan products are available through your authorized Spartan distributor or by visiting www.spartanchemical.com.

Initial Application:

1. Gather all necessary supplies and wear the personal protective equipment specified on the product's MSDS.
2. Strip away all old floor finishes completely. Depending on the build-up, use warm or room-temperature water (80°F-120°F / 27°C-49°C) and the Spartan stripper of your choice.
3. Remove all stripping solution and rinse thoroughly with two to three clean water rinses.
4. If the flooring is old, worn, or damaged, it’s recommended to apply two coats of a Spartan sealer, though The Fixx can also be used as a self-sealing finish.
5. Apply the finish in a uniform layer and allow it to dry completely for 30 to 40 minutes until dry to the touch. Apply additional coats in the same manner. Two to four coats are recommended.