Diversey Carefree Max Low Odor Floor Finish Sealer

Instructions for Use

Applying Floor Finish

• Block off areas to be stripped or finished, as floors will be slippery until dry.
• Strip the floor using a Diversey brand stripper, following the instructions on the stripper label.
• Apply 2-3 even coats of finish using a clean mop.
• Allow 30 minutes of drying time between coats. Note that temperature, humidity, and ventilation may impact drying time.

Maintenance

• Dust mop or sweep the floor regularly.
• Clean the floor with a mop or automatic scrubber using the recommended Diversey brand cleaner, following label instructions.
• To improve the floor's appearance, you can:
  • Spray buff with a Diversey Spray Buff, a red pad, and equipment operating at 175-1500 RPM.
  • Dry buff with a medium to aggressive pad and equipment operating at 1000-1500 RPM.
  • Ultra High-Speed burnish with a medium to aggressive pad and 2000 RPM equipment.

Before Recoating

• Dust mop or sweep the floor.
• Clean the floor with a mop or automatic scrubber using the recommended Diversey cleaner according to label directions.
• Block off the area and apply 1-2 even coats of finish using a clean mop.

Removal

• Strip the floor using a Diversey floor stripper, following label instructions.

Best Results

• Do not dilute the product.
• Avoid using on surfaces colder than 50°F (10°C) at 15% relative humidity.
• To prevent contamination, do not return unused product to the original container.
• Not suitable for use on wood surfaces.
• Floors may become slippery when wet or contaminated with foreign materials, so clean spills and contaminants immediately.
• Not intended for outdoor use. Meets ASTM D-2047 slip resistance standards.