Aggressive No-Rinse Stripper Technical Specifications:
- Color: Clear, slight amber
- Flash Point: None
- Fragrance: Sassafras
- Freeze/Thaw Stability: 3 cycles
- Residue on Evaporation: None
- pH (Concentrate): 13.5 - 14.0
- pH @ 10% Solution: 12.5 - 13.0
- Warranty: 2 years
- Specific Gravity: 1.02
Directions for Use:
This product is designed for removing water-based acrylic floor finishes from various resilient tiles and hard surfaces. It is not recommended for use on linoleum or sheet vinyl floors, and pre-testing is advised on linoleum, rubber, or asphalt tiles as color bleeding or discoloration may occur.
- Preparation: Sweep or dust mop the floor to remove any large debris.
- Dilution:
- For normal stripping, dilute 13 oz./gal. (100 mL/L) in water (1:10).
- For heavy stripping, dilute 25 oz./gal. (200 mL/L) in water (1:5).
- Application: Apply the solution liberally to the floor surface. Allow at least 5 minutes of contact time, ensuring the surface remains wet.
- Agitation: Use a low-speed rotary machine, automatic scrubber, or stripping machine to agitate the solution and break down the floor finish.
- Removal: Pick up the solution using a wet vacuum, automatic scrubber, or mop and bucket.
- Rinse: Thoroughly rinse the floor. No flood rinsing is necessary if the surface is free from dust and residue.
- Drying: Let the floor dry completely before applying a new finish or sealer.
Environmental Note: Please recycle the empty container when finished.
This aggressive no-rinse stripper provides quick, efficient removal of floor finishes while minimizing time and effort required for cleanup.
Reviews
There are no reviews yet.